Chapter 7
54
Set the Distinctive Ring to ON
Very important!
7
After you have set the Distinctive Ring feature
to ON, the receive mode is set to Manual
automatically. Your Distinctive Ring Number
does not allow Voice Calls - only Faxes. You
cannot change the receive mode to another
mode while the Distinctive Ring is set to On:
a Press Menu, 2, 0, 2.
b Press a or b to choose On.
c Press OK.
d Press Stop/Exit. Distinctive Ring is now
set to on.
Turning off Distinctive Ring 7
a Press Menu, 2, 0, 2.
b Press a or b to choose Off.
c Press OK.
d Press Stop/Exit.
Note
If you turn off Distinctive Ring, the
machine will stay in Manual receive
mode. You will need to set the Receive
Mode again. (See Choosing the receive
mode on page 46.)
Telephone Service for
New Zealand
7
FaxAbility 7
FaxAbility is a service offered by Telecom
that allows you to have an additional number
on one telephone line, with its own distinctive
ring pattern. This way, when you get an
incoming call, you can identify the number
being called by its ring.
How Will the Fax Machine Treat All
Other Numbers?
7
FaxAbility mode ensures that the machine
will answer calls to the FaxAbility (secondary)
number. When a call comes in to your main
number, all the telephones will ring. You can
set an external answering device (TAD) to
answer calls on the other number(s). (See the
chart in the following page.)
What is the Advantage of Using the
FaxAbility Function?
7
Using FaxAbility is the most efficient way to
receive both fax and telephone calls on the
same line. It is much easier for your callers
who dial manually. The fax machine will
answer with receiving tones so they will not
have to press an activation code. And the
people who call to talk on your main number
will not have to talk to your fax machine.
Basically, it gives you two independent
numbers without the higher cost of a second
line.
To Next Page
Loading...
Need help?
General
