Brother MFC MFC-9120CN User Manual

Printing data from a USB Flash memory drive (MFC-9320CW only)
101
14
f Press Mono Start or Colour Start to
print the data.
IMPORTANT
• To prevent damage to your machine, DO
NOT connect any device other than a
digital camera or USB Flash memory drive
to the USB direct interface.
• DO NOT remove the USB Flash memory
drive or digital camera from the USB direct
interface until the machine has finished
printing.
Note
You can change the default settings for
Direct Print by using the control panel
when the machine is not in the Direct Print
mode. Press Menu, 5 to enter the
USB Direct I/F menu. (See Entering
text on page 213.)
Printing data directly
from the USB flash
memory drive with
Secure Function
Lock 2.0 enabled
(MFC-9320CW only)
14
For more information about Secure Function
Lock 2.0, see Chapter 11 of the Network
User’s Guide on the CD-ROM we have
supplied.
a Connect your USB Flash memory drive
to the USB direct interface (1) on the
front of the machine.
The Direct key will light up. Press
Direct. Your machine will enter Direct
Print Mode.
b The following message appears if
Secure Function Lock is on.
Access Denied
c Press a or b to choose ID. Press OK.
1

Brother MFC MFC-9120CN Specifications

General

Print Technology	Laser
Connectivity	USB 2.0, Ethernet
Duplex Printing	Manual
ADF Capacity	35 sheets
Fax Modem Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Maximum Printing Speed (Black)	17 ppm
Maximum Printing Speed (Color)	17 ppm
Monthly Duty Cycle	Up to 30, 000 pages
Scanning Resolution	Up to 19200 x 19200 dpi (interpolated)
Optical Scan Resolution	1200 x 2400 dpi
Memory	64 MB
Paper Handling	250-sheet input tray
Scanner Type	Flatbed
Copy Speed	Up to 17 cpm
Paper Capacity	250 sheets
Print Speed	Up to 17 ppm (Black/Color)