Brother MFC MFC-9120CN User Manual

Chapter 13
98
Connecting a camera
as a storage device
13
Even if your camera is not in PictBridge
mode, or does not support PictBridge, you
can connect your camera as a normal
storage device. This enables you to print
photos from your camera.
Follow the steps in Printing data directly from
the USB Flash memory drive (MFC-9320CW
only) on page 100.
(If you would like to print photos in PictBridge
mode, see Setting your digital camera
on page 94.)
Note
The name of the storage mode and
operation differs among digital cameras.
Please refer to the documentation
supplied with your camera for detailed
information, such as how to switch from
PictBridge mode to mass storage mode.
Understanding the
error messages
13
Once you are familiar with the types of errors
that can occur while you are using the
PictBridge, you can easily identify and
troubleshoot any problems.
 Out of Memory
This message will appear if you are
working with images that are too large for
the machine's memory.
 Unusable Device
This message will appear if you connect
an incompatible or broken device to the
USB direct interface. To clear the error,
unplug the device from the USB direct
interface.
(For more detailed solutions, see Error and
maintenance messages on page 142.)

Brother MFC MFC-9120CN Specifications

General

Print Technology	Laser
Connectivity	USB 2.0, Ethernet
Duplex Printing	Manual
ADF Capacity	35 sheets
Fax Modem Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Maximum Printing Speed (Black)	17 ppm
Maximum Printing Speed (Color)	17 ppm
Monthly Duty Cycle	Up to 30, 000 pages
Scanning Resolution	Up to 19200 x 19200 dpi (interpolated)
Optical Scan Resolution	1200 x 2400 dpi
Memory	64 MB
Paper Handling	250-sheet input tray
Scanner Type	Flatbed
Copy Speed	Up to 17 cpm
Paper Capacity	250 sheets
Print Speed	Up to 17 ppm (Black/Color)