Chapter 7
56
How to Turn FaxAbility OFF or ON 7
The FaxAbility function is designed to
accommodate the FaxAbility service provided
by Telecom. To change the setting, repeat
Steps 1-3; Step 2 is where you can choose
either On or Off.
Call Waiting beeps caused by incoming calls
on your main number can affect fax
transmissions. If you have FaxAbility Service
but don’t have Call Waiting, you need do
nothing at this stage. If you do have Call
Waiting as well as FaxAbility, set the Call
Waiting menu option to On. See below.
a Press Menu, 2, 0, 2.
b Press a or b to set FaxAbility to On or
Off.
If you have FaxAbility service, choose
On.
Press OK.
c Press a or b to set Call Waiting to On or
Off. If you have Call Waiting service,
choose On to avoid the trouble caused
by Call Waiting.
Press OK.
d Press Stop/Exit.
Telephone Service for
Some Countries
7
Distinctive Ringing (For
Singapore and Hong Kong) 7
This machine feature lets you use the
Distinctive Ringing subscriber service offered
by some telephone companies, which allows
you to have several telephone numbers on
one telephone line. Each telephone number
has its own Distinctive Ringing pattern, so
you will know which telephone number is
ringing. This is one way you can have a
separate telephone number for your
machine.
Your machine has a Distinctive Ringing
function, allowing you to dedicate one
telephone number just for receiving faxes.
You will need to set Distinctive Ringing to On.
Note
• You can switch it off temporarily, then
turn it back on. When you get a new fax
number, make sure you reset this
function.
• The machine will answer only calls to
the Distinctive Ringing number.
Note
After you have set the Distinctive Ring
feature to On, the receive mode is set to
Manual automatically. Unless you have a
TAD or Voice Mail set up on the Distinctive
Ring number, Manual mode means you
must answer all the call yourself. You can
not change the receive mode to the other
mode while the Distinctive Ring is set to
On.
To Next Page
Loading...
Need help?
General
