Brother MFC MFC-9120CN User Manual

Chapter 2
12
c Fan the stack of paper well to avoid
paper jams and misfeeds.
d Put paper in the tray, and make sure that
the paper is below the maximum paper
mark (1). The side to be printed on must
be face down.
IMPORTANT
Make sure the paper guides touch the
sides of the paper so it will feed correctly.
If you do not do this, it may cause damage
to your machine.
e Put the paper tray firmly back in the
machine. Make sure that it is completely
inserted into the machine.
f Lift up the support flap (1) to prevent
paper from sliding off the face-down
output tray or remove each page as
soon as it comes out of the machine.
Loading paper in the manual
feed slot 2
You can load envelopes and special print
media one at a time into this slot. Use the
manual feed slot to print or copy on labels,
envelopes or thicker paper.
Printing on plain paper, recycled
paper or bond paper from the manual
feed slot
2
Before loading, press the corners and sides
of the envelopes to make them as flat as
possible.
Note
The machine automatically turns on the
Manual Feed mode when you put paper in
the manual feed slot.
1
1

Brother MFC MFC-9120CN Specifications

General

Print Technology	Laser
Connectivity	USB 2.0, Ethernet
Duplex Printing	Manual
ADF Capacity	35 sheets
Fax Modem Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Maximum Printing Speed (Black)	17 ppm
Maximum Printing Speed (Color)	17 ppm
Monthly Duty Cycle	Up to 30, 000 pages
Scanning Resolution	Up to 19200 x 19200 dpi (interpolated)
Optical Scan Resolution	1200 x 2400 dpi
Memory	64 MB
Paper Handling	250-sheet input tray
Scanner Type	Flatbed
Copy Speed	Up to 17 cpm
Paper Capacity	250 sheets
Print Speed	Up to 17 ppm (Black/Color)