Brother MFC MFC-9120CN User Manual

Loading paper and documents
15
2
Note
• Put the paper into the manual feed slot
with the side to be printed face up.
• Make sure that the paper or print media
(see Acceptable paper and other print
media on page 17) is straight and in the
correct position on the manual feed slot. If
it is not, the paper may not be fed
correctly, resulting in a skewed printout or
a paper jam.
• Do not put more than one sheet of paper
in the manual feed slot at any one time, as
it may cause a jam.
• Pull the paper out completely when you
retry putting the paper into the manual
feed slot.
• If you put paper or other print media in the
manual feed slot before the machine is in
the Ready mode, an error may occur and
the machine will stop printing.
• To easily remove a small printout from the
output tray, lift up the scanner by using
both hands as shown in the illustration.
• You can still use the machine while the
scanner is up. To close the scanner, push
it down with both hands.
• When the top cover is open, you cannot
open the scanner.

Brother MFC MFC-9120CN Specifications

General

Print Technology	Laser
Connectivity	USB 2.0, Ethernet
Duplex Printing	Manual
ADF Capacity	35 sheets
Fax Modem Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Maximum Printing Speed (Black)	17 ppm
Maximum Printing Speed (Color)	17 ppm
Monthly Duty Cycle	Up to 30, 000 pages
Scanning Resolution	Up to 19200 x 19200 dpi (interpolated)
Optical Scan Resolution	1200 x 2400 dpi
Memory	64 MB
Paper Handling	250-sheet input tray
Scanner Type	Flatbed
Copy Speed	Up to 17 cpm
Paper Capacity	250 sheets
Print Speed	Up to 17 ppm (Black/Color)