242
MIDSECTION
EXHAUST HOUSING SERVICE
EXHAUST HOUSING
SERVICE
Exhaust Housing Removal
Before removing the exhaust housing:
• Remove the gearcase. Refer to Gearcase
GEARCASE REMOVAL AND INSTALLATION
on p. 268.
• Remove the powerhead. Refer to POWER-
HEAD REMOVAL on p. 196.
Remove and discard four lower mount screws.
Remove the exhaust housing.
Lower Mount Service
Remove lower mount covers and inspect the
lower mounts.
If replacement is necessary, lubricate mount with
soapy water and carefully pry at both ends to
remove.
“20” Models 23036
“25” Models 32590
007178
32578
To Next Page
Loading...
