System Description VÅNTEC-1 Detector User Manual
3 - 4 M88-E01072
Detector overall dimensions and weight 3.5 in H x 3.1 in W x 7.5 in D, 4.4 lbs (90 mm H x
80 mm W x 190 mm D, 2 kg)
Controller chassis unit 5.25 in H x 19 in W x 16 in D, 35 lbs (133 mm H x 483
mm W x 406 mm D, 15.9 kg)
External FDC unit (if present) 3.5 in H x 19 in W x 16.25 in D, 10 lbs (90 mm H x
480 mm W x 410 mm D, 4.5 kg)
Length of cables between the detector and
the controller chassis unit
16.4 ft (5 m)
Disconnect device IEC 320 connector/plug on power supply cord
Software
DIFFRAC
plus
Measurement package version 2.4 or
higher
Included in delivery VÅNTEC-1 detector; front-end read-out and supply
electronics; mounting and optics assembly, including
Kβ-filter, 2.5° Soller slit and primary beam stop
Detector Specifications
Table 3.1 – Basic specifications of the VÅNTEC-1
To Next Page
Loading...
Need help?
General
