Bruker VANTEC-1 User Manual

Software Configuration VÅNTEC-1 Detector User Manual
6 - 8 M88-E01072
2. Go to IP Setup and Services (see Figure
6.7).
2.1 In IP Setup, select the Static Address
Assignment radio button.
2.2 Enter the Host IP Address 192.168.23.2
and the Netmask 255.255.255.0. Do
not change any other values.
2.3 Under Services, check the HTTP Inter-
face checkbox.
2.4 Click OK.
2.5 If no Users are available, refer to
Appendix C.1.
Figure 6.7 - IP setup

Bruker VANTEC-1 Specifications

General

Brand	Bruker
Model	VANTEC-1
Category	Security Sensors
Language	English