4 – 72 Repair Manual RRE140/160/180/200/250 © BT
Functions and parameters
Parameters
T-code Valid from serial number Date Publication No.
815, 816 6051502 2008-08-21 261828-040
323 12 300 1 47 Extra (Aux) max. flow, direction B3
324 12 300 1 12 Extra (Aux) max. flow, direction B4
325 101 9999 1 505 Extra (Aux.) overlapping time, direction A1
326 101 9999 1 505 Extra (Aux.) overlapping time, direction A2
327 101 9999 1 505 Extra (Aux.) overlapping time, direction A3
328 101 9999 1 505 Extra (Aux.) overlapping time, direction A4
329 101 9999 1 505 Extra (Aux.) overlapping time, direction B1
330 101 9999 1 505 Extra (Aux.) overlapping time, direction B2
331 101 9999 1 505 Extra (Aux.) overlapping time, direction B3
332 101 9999 1 505 Extra (Aux.) overlapping time, direction B4
341 30 100 10 100 % Lift speed
342 30 100 10 100 % Lowering speed
343 30 100 10 100 % Reach speed
344 0 1 1 1 Fork speed reduction enable
345 0 20000 10 0 mm Special height 1
346 0 20000 10 0 mm Special height 2
347 0 140 5 140 0.1
km/h
Raise/lower function not possible above this
speed
355 500 10000 100 500 mm Starting point for Ergo cabin to tilt down
371 0 100 1 5 % Height preselector, creep speed lift before
stop
372 0 100 1 5 % Height preselector, creep speed lowering
before stop
373 0 100 1 25 mm Height preselector, creep distance lift
374 0 100 1 25 mm Height preselector, creep distance lowering
375 0 1000 10 350 mm Height preselector, braking distance lift
376 0 1000 10 350 mm Height preselector, braking distance lower-
ing
377 0 100 1 10 mm Height preselector, max. variation in stop
heighit
378 40 250 1 120 mm Height preselector, p+d height, difference
379 0 500 5 200 kg Height preselector,automatic load detection
limit
380 10 15000 10 10 mm Lift height limitation 1
381 10 15000 10 10 mm Lift height limitation 2
382 10 15000 10 10 mm Lift height limitation 3
No. Min. Max. In-
cre-
ment
De-
fault
Unit Description
To Next Page
Loading...
