Burkert 8630 - P.CO TUNE - Self-optimization of the Process Controller (Process Tune)

104 - 8630
OPERATING THE PROCESS CONTROLLER
P.CO LEAK
Reading-in of the leakage characteristic (Flow rate control option)
Start automatic
determination of
the leakage
characteristic
Deactivate leakage characteristic
Activate leakage characteristic
*Show the
leakage
characteristic
display
To interrupt the leakage determination, press both arrow buttons simultaneously and select
LEAK BRK.
NOTE
Reference points are displayed alternately as conveyance pressure in mbar and air flow or conveyance speed in m
3
/h or m/s
respectively.
Release