Cadillac 2008 CTS - Page 507

507 . . .
–
–
–
–
–
Section 5
3. Remove the sealant canister
from the air compressor.
- Compressor kits equipped
with a selector switch:
Press the yellow button to
release the sealant canister.
- Compressor kits not
equipped with a selector
switch:
Rotate the sealant canister so
that the inflator hose is
aligned with the slot in the
compressor.
Pull up on the sealant canister
to remove it from the air
compressor.
See your dealer to purchase a
new tire sealant canister.
Installing the Tire Sealant
Canister
• Compressor kits equipped with
a selector switch:
- Press the new sealant canister
into place.
-Wrap the sealant filling hose
around the air compressor
channel.
AKENG40_CTS Page 507 Wednesday, July 23, 2008 11:47 AM