79 . . .
–
Section 1
GAGE TRACERS
Note: This feature is only
available on CTS-V models.
This feature allows you to enable
or disable the tracer lights in the
speedometer and tachometer.
Press the button to enter the
submenu.
While in this submenu, press the
button repeatedly to scroll
through the following options:
• OFF
With this setting activated, the
tracer lights are disabled.
• ON
With this setting activated, the
tracer lights are enabled.
This is the default setting.
• NO CHANGE
Once the desired setting is
displayed, press the button to
select it.
You may now either exit
programming mode or program
the next available feature.
To exit programming mode, see
"Exiting Programming Mode" later
in this section.
AKENG40_CTS Page 79 Wednesday, July 23, 2008 11:47 AM
To Next Page
Loading...
