EasyManua.ls Logo

Canon CDI-E075-010 - Page 113

Canon CDI-E075-010
214 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
107
Shooting - Selecting Particular Effects
4
Shoot the image.
The indicator beside the viewfinder lights yellow when the shutter button is
pressed halfway.
Using the Manual Focus in Combination with the Auto Focus
The camera automatically searches for a more suitable focusing point from the
current manually focused location.
1
Focus the camera with the manual focus.
2
Press the
button.
The camera focuses automatically to a more accurate focusing point near the
current focusing point.
○○○○○○○○○○○○○○○○○○○○○○
You cannot change the AF frame setting while focusing manually. Cancel the manual
focus mode, then change the AF frame setting. With the changed AF frame setting,
you can resume the manual focus mode.
○○○○○○○○○○○○○○○○○○○○○○
Some settings are not available with certain Shooting modes. Please refer to
Functions Available in Each Shooting Mode (p. 208).
You can use manual focus in the macro focal distance 5 to 50 cm (0.16 to 1.6 ft.)
at wide angle end and 15 to 50 cm (0.49 to 1.6 ft.) at telephoto end. In this case,
the fine scale is adopted.
You can change the MF indicator displayed distance units (p. 164).

Table of Contents

Related product manuals