EasyManua.ls Logo

Canon CDI-E075-010 - Page 84

Canon CDI-E075-010
214 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
78
Setting the Shutter Speed (continued)
○○○○○○○○○○○○○○○○○○○○○
Functions Available in Each Shooting Mode (p. 208)
Please note that camera shake becomes a factor at low shutter speeds. If the
camera shake warning
appears in the center of the LCD monitor, secure the
camera to a tripod before shooting.
The fastest shutter speed for flash synchronization is 1/250 second. The camera
automatically resets the shutter speed to 1/250 second if a faster speed is selected.
The aperture value and shutter speed change according to the zoom state as
follows.
Aperture
Shutter Speed (seconds)
Wide Angle
F 2.0 - 3.5 to 1/1250
F 4.0 - 8.0 to 1/2000
Telephoto
F 3.0 - 5.0 to 1/1250
F 5.6 - 8.0 to 1/2000
Shutter Speed Display
The shutter speeds from 2000 to 4 in the display panel are actually the
denominator of a fraction of a second. For example, 160 indicates a speed of
1/160 second. For slower speeds, quote marks indicate the decimal place, so that
0"3 indicates 0.3 second and 2" indicates 2 seconds.
2000 1600 1250 1000 800 640 500 400 320 250
200 160 125 100 80 60 50 40 30 25 20 15
13 10 8 6 5 4
0"3 0"4 0"5 0"6 0"8 1" 1"3 1"6 2" 2"5 3"2
4" 5" 6" 8" 10" 13" 15"
The display of shutter speeds from 1/4 to 1/2000 second differs between the
display panel and LCD monitor.
Shutter Speed 1/2000 sec. . . . 1/4 sec. . . . 0.8 sec. . . . 15 sec.
Display Panel . . . . . . . . .
LCD Monitor 1/2000 . . . 1/4 . . . 0"8 . . . 15"

Table of Contents

Related product manuals