Getting Started
•••••
-----------------------
LCD
Backlight
You
can switch the brightness
of
the LCD
screen to [NORMAL] or [BRIGHT].
Inserting
and
Removing
a
Memory
Card
Only miniSD cards can be used with this
camcorder.
CD
NOTES
• This setting does not affect the brightness
of
the recording or the viewfinder screen.
• Using the [BRIGHT] setting will shorten the
effective usage time
of
the battery.
1 Turn
on
the camcorder.
2 Press [MENU
I.
3 Select
(.T)
[DISPLAY SETUP] and
press
(liD.
4 Select
(.T)
[BACKLIGHT] and
press (
).
5 Select
(.T)
the desired option and
press
Oil).
6 Press IMENU I to close the menu.
1 Turn off the camcorder.
2 Open the memory card slot cover.
3 Insert the memory card straight all
the way into the memory card slot.
4 Close the cover.
Do not force the cover closed if the
memory card is not correctly inserted.
MENU
MENU
(CD
27)
To
REMOVE
THE
MEMORY
CARD
First push the memory card once to
release it, and then pull the card out.
__
IMPORTANT
Make sure to initialize all memory cards before
using them with this camcorder
(CD
70).
~.~
...
_._.
...
__
..
.
._._
...
__
.
__
J
Performance cannot be guaranteed for all
miniSD cards.
To Next Page
Loading...
