Canon DC22 - Selecting the Recording Data Display

------------------------_e •••• Playback
3 Select (.A.T) [DATA CODE] and press I;;l
(). ~
4 Select (.A.T) the desired option and
press
0111).
5 Press IMENU] to close the menu.
Turning the On-screen Displays On/Off
l~;
~
During playback, repeatedly press ( .. )
[DISP.] to turn the on-screen displays
on/off
in the following sequence:
All on-screen displays
+ data code display on
•
Only the data code display on
•
All on-screen displays off
POINTS TO CHECK
Selecting the Recording Data Display
The camcorder keeps a data code
containing the recording date and time
and other camera data such as shutter
speed and exposure (f-stop). You can
select the data to be displayed.
(CD 13)
lPLAY'IZI) : [DATE], [TIME], [DATE&TIME]
only.
Options • Default value
Displays the exposure, shutter speed, date
and time
of the recording.
@] DISPLAY SETUP
I DATA CODE m::e DATE & TIMEt
Selecting the Data Code
MENU
(OJ 27)
MENU
1 Press [MENU ).
2 Select (.A.T) [DISPLAY SETUP] and
press (
).