-----------------.
••••
Adjusting the Picture: Exposure, Focus and Color
POINTS
TO
CHECK
(CO
13)
CD
NOTES
Available
aperture
values
[1.8], [2.0], [2.4], [2.8], [3.4], [4.0], [4.8],
[5.6], [6.7], [8.0], [9.5], [11], [14], [16]
• Available aperture values vary depending on
the zoom position.
• The aperture value flashes when the selected
aperture
is
not appropriate for the recording
condition.
In
such case, readjust the aperture.
..
»
a.
<
~,
(")
CD
a.
'"T1
c::
~
(")
r+
o·
~
en
(CO
13)
POINTS
TO
CHECK
Mode switch:
P,
seN (except for the
[IIFIREWORKS]
recording program).
Manual
Exposure
Adjustment
Adjust the exposure when a subject is
underexposed (for example, when backlit
subjects appear too dark
in
the image) or
overexposed (for example, when
recording subjects under very strong light
and they appear too bright or glaring
in
the image).
~!
~~~
1 Press (J..)
IEXP!.
• The exposure adjustment indicator
0-1-0
and the neutral value
"±O"
appear on the screen.
• If you operate the zoom during
exposure lock, the brightness
of
the
image may change.
2
Adju~t
(~~
)
the
brightness
of
the
image
as
required.
• The adjustment range and the length
of
the exposure adjustment indicator
will vary depending on the brightness
of
the picture at the time you locked
the exposure.
• Pressing (... )
~
again will cancel
the exposure lock and return the
camcorder to automatic exposure.
ICAMERAI
."
CIIJ
Pf'illIIDSCN
Mode switch: P
r~N;i
FUNC.
¢
~~~
...
1
Select
the
recording
program
[Av
APERTURE-PRIO.AE] as
described
in
Selecting
the
Recording
Program
(Q]
47).
2
Press
(liD.
3 Change
(J..T)
the
aperture
value
and
press
(It))
to
save
the
setting.
Smaller aperture values (or f/
numbers) represent a larger lens
opening, and vice versa.
To Next Page
Loading...
Need help?
General
