.......
-------------------------------
Playing
Back
your
Disc
on
a
DVD
Player
or
a
Computer's
DVD
Drive
After finalizing the disc you can play it
on
DVD players compatible with the type of
disc you used (DVD-R, DVD-R DL or
DVD-RW). For details about disc
'compatibility refer to the instruction
manual
of
the DVD player or DVD drive.
On
a
DVD
Player
1 Turn
on
the TV and DVD player.
2 Insert a finalized disc
in
the DVD
player.
3 Select the scene you want to play
from the index screen.
On
a
Computer's
DVD
Drive
1 Insert a finalized disc
in
the DVD
drive.
2 Run the DVD playback software.
• Refer also to the instruction manual
and help modules of your DVD
playback software.
•
To
view still images recorded on the
disc, close first any DVD playback
software that may
be
running.
CD
NOTES
• DVD-RW discs recorded
in
VR mode can
only be played
on
VR mode-compatible DVD
players.
• Depending
on
your DVD device you may not
be able to play the disc.
•
In
order to view the still images recorded on
the disc
in
a DVD player, you have to convert
individual images to scenes, or create a
Photomovie scene
(CO
68) before finalizing the
disc. The resolution of Photomovie scenes will
be lower than that of the original still images.
•
In
order to play the disc on a computer you
need to have DVD playback software installed
and running. Also,
in
order to play back a
DVD-R DL you must have a DVD drive capable
of reading dual-layered DVD discs.
Unfinalize a disc to allow recording
additional movies
on
the disc even after it
was finalized.
POINTS
TO
CHECK
(CO
13)
Disc type:
~
DVD-RW initialized
in
VIDEO
mode.
(lIMPORTANT
•
Be
sure
to
unfinalize
the
disc
in
normal
room
temperatures.
If
the
procedure
was
not
completed
correctly
due
to
high
temperature,
let
the
camcorder
cool
off
before
resuming
operation.
•
Place
the
camcorder
on
a
table
or
other
stable
surface
before
starting
the
procedure.
Subjecting
the
camcorder
even
to
slight
impacts
(for
example
to
place
it
on
a
table
or
to
disconnect
the
AV
cable)
after
the
unfinalization
process
started
may
result
in
permanent
data
loss.
• Always power the camcorder using the
compact power adapter. The operation cannot
be started if the camcorder
is
powered only with
the battery pack.
• Avoid the following actions while the
operation
is
in
progress. Failing to do so can
interrupt the process and result
in
permanent
data loss.
-
Do
not move the camcorder.
-
Do
not disconnect the compact power
adapter.
• Only discs that were finalized using this
camcorder can be unfinalized with
it.
To Next Page
Loading...
