Getting Started
•••••
-----------------------
moving the camcorder while the
operation
is
in
progress.
•
You
can start recording movies once
the record
pause.
II
indication
appears.
o
IMPORTANT
The process of recognizing a disc may take a
moment. The
0 display will move while the
disc
is
being read. Wait until the camcorder
finishes recognizing the disc before you start
recording.
Removing
the
Disc
1 Move the power switch to ON.
2 Slide [OPEN I fully
in
the direction
of
the arrow and gently open the disc
cover completely until it stops.
• Do not subject the camcorder to
strong impacts while the DISC access
indicator
is
on
or flashing.
• Retract the grip belt under the
camcorder so it will not get
in
the way
of the disc cover.
• It may take a moment after sliding
[OPEN I for the disc cover to open.
3 Grab the edge
of
the disc and gently
pull it out.
Be careful not to touch the recording
surface of the disc or the pick
up
lens.
4 Close the disc cover.
o
IMPORTANT
When you slide IOPEN I after making a
recording, important file allocation data
is
updated on the disc before the disc cover
opens. While the DISC access indicator
is
on or
flashing do not subject the camcorder to shocks
such as forcefully laying it on a table.
To Next Page
Loading...
