5. In the Settings (General Settings) dialog box, click OK.5.
The Scan Utility main screen reappears. You can scan via a network connection.
Setting for Scanning from the Operation Panel
You can make the setting for scanning from the operation panel.
Important
• Set Scan Utility to use your scanner or printer via a network connection beforehand.•
Setting for Scanning with Scan Utility
1.
Check that Network Scanner Selector EX2 is running.
1.
If Network Scanner Selector EX2 is running, (Network Scanner Selector EX2) appears in the
notification area on the desktop. Click to check the hidden icons as well.
Note
• If the icon is not displayed in the notification area on the desktop, follow the procedure below to•
start.
Windows 11/Windows 10:
From the Start menu, click (All apps >) Canon Utilities > Network Scanner Selector
EX2.
Windows 8.1:
Click Network Scanner Selector EX2 on the Start screen.
If Network Scanner Selector EX2 is not displayed on the Start screen, select the Search
charm, then search for "Network Scanner Selector EX2".
Windows 7:
From the Start menu, click All Programs > Canon Utilities > Network Scanner Selector
EX2 > Network Scanner Selector EX2.
The icon appears in the notification area on the desktop, and the Scan-from-PC Settings screen
appears. In that case, skip ahead to Step 3.
2.
In the notification area on the desktop, right-click (Network Scanner Selector EX2),
2.
then select Settings....
The Scan-from-PC Settings screen appears.
3.
Click Scan-from-Operation-Panel Settings.
3.
The Scan-from-Operation-Panel Settings screen appears.
4.
Select your scanner or printer from Scanners and click OK.
4.
Select the MAC address of your scanner or printer.
402
To Next Page
Loading...
Need help?
General