Transmission/Reception of Faxes Using ECM
This printer is set to send/receive faxes in Error Correction Mode (ECM). If the recipient's fax device is
compatible with ECM, ECM automatically corrects errors and resends the fax.
Note
• If the sender's or recipient's fax device is not compatible with ECM, the fax will be sent/received without
automatic error correction.
• To receive color faxes, make sure that ECM RX in Adv. communication settings in Advanced FAX
settings under FAX settings is set to ON.
Advanced FAX settings
To disable ECM transmission/reception, set ECM TX and ECM RX in Adv. communication settings to
OFF.
• Transmission may take longer when ECM is enabled.
1012
To Next Page
Loading...
