Selecting Enable allows you to receive the WSD printing data faster.
■ WSD scan from this device
Selecting Enable allows you to transfer the scanned data to the computer using WSD.
■ Timeout setting
Specifies the timeout length.
◦ Bonjour settings
Setting items for LAN using Bonjour for Mac OS.
■ Enable/disable Bonjour
Selecting Enable allows you to use Bonjour to perform the network settings.
■ Service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
• You cannot use the same service name as that already used for other LAN connected
devices.
◦ LPR protocol setting
Enables/disables the LPR setting.
◦ RAW protocol
Enables/disables RAW printing.
◦ LLMNR
Enables/disables LLMNR (Link-Local Multicast Name Resolution). Selecting Active allows the
printer to detect printer's IP address from the printer name without a DNS server.
◦ Wired LAN DRX setting
Selecting Enable allows you to activate discontinuous reception when the printer is connected to a
device compatible with wired LAN.
303
To Next Page