Setting Date and Time
This section describes the procedure to set the date and time.
1. Make sure that printer is turned on.
2. Flick HOME screen, and then tap Setup.
Using the Operation Panel
3.
Tap Device settings.
4.
Tap Device user settings.
5.
Tap Date/time setting.
6.
Set date.
1. Tap a setting item to change.
2. Tap number to enter.
Enter only the last two digits of the year.
3.
Tap OK.
4.
Tap OK again when all settings are completed.
7. Set time.
933
To Next Page
Loading...
