SECTION 82 - LOADER 5
DUMPING THE LOADER BUCKET
With the lever in position (5), the bucket rolls forward
(dumps).
AUTOMATIC RETURN TO LOADER BUCKET
FILLING
With the lever in position (6), the attachment lowers
and, simultaneously, the bucket places itself to the
digging position.
NOTE: it is possible to adjust the tilt angle for bucket
filling.
1.2 4x1 LOADER BUCKET CLAM
CONTROL (If fitted)
This control operates the opening and closing of the
4x1 loader bucket clam.
This control is proportional:
When releasing the roller (7), it automatically returns
to the initial position (neutral) and the bucket remains
in the position where it was when movement
stopped.
It is possible to lock the roller into detent by moving
the roller to the full forward (raised) position. To re-
lease the detent, press on the lower portion of the
roller as your return it to the neutral position.
When shifting the roller (7) forward: the loader buck-
et clam closes (A).
When shifting the control (7) backward: the loader
bucket clam opens (B).
6
7
8
To Next Page
Loading...
