SECTION 00 - SAFETY PRECAUTIONS 3
This warning symbol points out important messages
involving personal safety.
Carefully read the safety rules contained herein and
follow advised precautions to avoid potential haz-
ards and safeguard your safety and personal integ-
rity.
In this manual you will find this symbol together with
the following keywords:
WARNING - it gives warning about improper repair
operations and deriving potential consequences af-
fecting the service technician’s personal safety.
DANGER - it gives specific warning about potential
dangers for personal safety of the operator or other
persons directly or indirectly involved.
TO PREVENT ACCIDENTS
Most accidents and personal injuries that occur in the work site or on the road, are caused by the failure of
some individual to follow simple and fundamental safety rules or precautions.
For this reason, MOST ACCIDENTS CAN BE PREVENTED: by recognizing the real cause and taking the nec-
essary precautions, before the accident occurs.
Regardless of the care used in design and construction of any type of equipment, there may be conditions that
cannot be completely safeguarded against, without interfering with reasonable accessibility and efficient oper-
ation.
A careful operator or technician is the best precaution against accidents. The complete observance of one sim-
ple rule would prevent many thousands of serious injuries each year.
This rule is: never attempt to clean, lubricate or adjust a machine while it is in motion.
To Next Page
Loading...
