Case 580SR+ - Page 477

SECTION 25 - FRONT AXLES 125
Assemble the two half housings of the differential
unit (3) and (12).
SWARNING
Carefully check that the marks of both differential
half housings coincide.
Assemble the ring gear (14) by means of a hammer.
Apply Loctite 242 on the thread of screws (1).
Tighten the screws (1) to the specified torque.
F27451
3
12
F29320
14
F27316
1
F27315
1
www.maskinisten.net
Copyright ©