CHC i80 User Manual

7. Configuring through a web browser
i80 GNSS Receiver User Guide  Page 98
Notes
 It may take about 3 or 4 minutes to complete the firmware
upgrading. Do not touch the power button or unplug the power
until the upgrading process is finished, or damage will be caused to
the receiver.
 The receiver will restart after the firmware upgrading is done, so
users need to reconnect the receiver with your computer via Wi-Fi,
and then log-in the receiver through a web browser to continue the
configuration.
7.11.4. CONFIG FILE SUBMENU
In this submenu, users can download the configuration file by tapping
button and determine a saving path to download the
configuration file (.cfg file). Also, users can tap the Browse button to locate
the existing configuration file → tap Confirm button to confirm the selected
file and start updating.
7.11.5. GNSS REGISTRATION SUBMENU
Use this submenu to register the receiver. Paste or enter the registration
code to the Registration Code field → tap Registration button to complete
the registration.
7.11.6. THE HARDWARE VERSION SUBMENU
Use this submenu to check the hardware information, including main board
version and core board version:

CHC i80 Specifications

General

Brand	CHC
Model	i80
Category	Receiver
Language	English