CHC i80 User Manual

2. Getting started with i80
i80 GNSS Receiver User Guide  Page 15
2.7. CONNECTING TO A CONTROLLER
2.7.1. CONNECTING VIA WI-FI WITH HCCONFIG SOFTWARE
1. Turn on the controller → run Hcconfig → tap Connection in the main
menu.
2. In the Connection screen, select CHC for the Manufacture field, Smart
GNSS for Device Type field, WIFI for Mode field.
3. Tap the setting button next to Mode field → turn on the Wi-Fi function
→ tap Menu button → tap Wi-Fi Settings.
4. In the Configure Wireless Network Settings screen, tap the wireless
network named as the SN of your receiver.
5. In the pop-up screen, tap Next button to enter Configure Network
Authentication screen → enter the Network Key →tap Next button.
GPS to PC Data Cable

CHC i80 Specifications

General

Brand	CHC
Model	i80
Category	Receiver
Language	English