CHC i80 User Manual

2. Getting started with i80
i80 GNSS Receiver User Guide  Page 22
Rover as Connection Type according to the your needs → tap in
the lower right corner to connect the software with the receiver via
Wi-Fi.
2.7.4. CONNECTING VIA BLUETOOTH WITH LANDSTAR 6 SOFTWARE
1. Turn on the controller →run LandStar 6 → create a new project or open
an existing project.
2. In the Main Menu, tap Device → tap Connection.
3. Select CHC for the Manufacture field, Smart GNSS for Device Type field,
Bluetooth for Connection field.
4. Tap icon next to Connection field → tap Search Device in the
pup-up Bluetooth Binding screen → select the Bluetooth device named
as the SN of your receiver → tap in the lower right corner to go

CHC i80 Specifications

General

Brand	CHC
Model	i80
Category	Receiver
Language	English