6. Survey with LandStar 6 software
i80 GNSS Receiver User Guide Page 72
Notes
When select custom format, users can tap button next to File
Tpye field to define the file format according to your requirement.
After the file has been successfully exported in the controller,
connect the controller to the office computer for file transfer (please
refer to corresponding user guide of the controller that you are
using for instruction) and postprocessing.
6.7. RECEIVER REGISTRATION
When the software prompt that the receiver is overdue, users need to
contact your local CHC dealer to get the registration code.
To register the receiver:
1. In the main menu, tap Device → tap Device Info.
2. Tap button in the lower left corner.
3. Enter the registration code in the pop up window.
To Next Page
Loading...
Need help?
General
