CHC i80 - Data Export

6. Survey with LandStar 6 software
i80 GNSS Receiver User Guide  Page 71
Note – The coordinates translated are local grid coordinates rather than
WGS-84 coordinates.
6.6. DATA EXPORT
1. In the main menu, tap Project → tap Export.
2. Select one data format (for example, Custom Format) according to your
requirement.
3. Tick the point type(s) → enter the File Name → select the File Type
from the dropdown list → select the path that used to store the file.
4. Tap button → the software will prompt whether the file has been
successfully exported.