6. Survey with LandStar 6 software
i80 GNSS Receiver User Guide Page 70
shifted.
3. Tap button next to the Known Point field to select that common
point determined by the initial coordinate system.
4. The offset information of base coordinate system that need to be
shifted will be displayed automatically.
5. Tap button → a message will pop up asking user whether to
translate the coordinates determined by the current base coordinate
system to the initial one.
6. If tap YES button, all the coordinates determined by the current base
coordinate system will be translated. Also, the Point Data Management
screen will pop up to help user check whether the coordinates
determined by the current base coordinate system have changed.