EasyManuals Logo

Chroma 63600-2 User Manual

Default Icon
258 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #188 background imageLoading...
Page #188 background image
Programmable DC Electronic Load 63600 Series Operation & Programming Manual
5-56
DIGitizing:INITiate
Type: Channel-Specific
Description: Start the digitizing function to wait trigger signal.
Setting Syntax DIGitizing:INITiate
Setting Parameters: None
Setting Example: DIG:INIT Initial digitizing function.
Query Syntax: None
Return Parameters:None
Query Example: None
DIGitizing:SAMPling:POINt
Type: Channel-Specific
Description: Set the sampling points for digitizing function.
Setting Syntax: DIGitizing:SAMPling:POINt<space><NRf+>
Setting Parameters:<NRf+>, 1 ~ 15,000, Resolution = 1, Unit = None
Setting Example: DIG:SAMP:POIN 500 Set sampling points = 500
DIG:SAMP:POIN MAX Set sampling points = maximum
value.
DIG:SAMP:POIN MIN Set sampling points = minimum
value.
Query Syntax: DIGitizing:SAMPling:POINt?[<space><MAX | MIN>]
Return Parameters:<NR1>, [Unit = None]
Query Example: DIG:SAMP:POIN?
DIG:SAMP:POIN? MAX
DIG:SAMP:POIN? MIN
DIGitizing:SAMPling:TIME
Type: Channel-Specific
Description: Set the sampling time for digitizing function.
Setting Syntax: DIGitizing:SAMPling:TIME<space><NRf+>[suffix]
Setting Parameters:<NRf+>, 2μs ~ 40ms, Resolution = 2μs, Unit = Second
Setting Example: DIG:SAMP:TIME 0.02 Set sampling time = 20ms
DIG:SAMP:TIME 20ms Set sampling time = 20ms
DIG:SAMP:TIME MAX Set sampling time = maximum
value.
DIG:SAMP:TIME MIN Set sampling time = minimum
value.
Query Syntax: DIGitizing:SAMPling:TIME?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Second]
Query Example: DIG:SAMP:TIME?
DIG:SAMP:TIME? MAX
DIG:SAMP:TIME? MIN
DIGitizing:TRIGger[:STATe]
Type: Channel-Specific
Description: Set the software trigger for digitizing function.
Setting Syntax DIGitizing:TRIGger[:STATe]<space><CRD | NR1>
Setting Parameters: <CRD | NR1>, OFF(0), ON(1) [Unit = None]
Setting Example: DIG:TRIG ON Set trigger state to ON.
DIG:TRIG 0 Set trigger state to OFF.
Query Syntax: DIGitizing:TRIGger[:STATe]?
Return Parameters:<CRD>, IDLE, PRE_TRIG, WAIT_TRIG, POST_TRIG
Query Example: DIG:TRIG?

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Chroma 63600-2 and is the answer not in the manual?

Chroma 63600-2 Specifications

General IconGeneral
BrandChroma
Model63600-2
CategoryPower Supply
LanguageEnglish

Related product manuals