116
9700 Mobile Computer (CE) Reference Manual
USE DEBUG TOOLS
To check debug settings, select Debug in the drop-down bar.
Item
Description
Driver Debug Select whether to debug the WLAN driver, and the output mode for driver debug.
Value: Not set, 1-Text(Low), 2-Text, 3-Text(High), 4-Serial(Low), 5-Serial,
6-Serial(High)
Default: Not set
When set as 1-Text(Low), 2-Text, or 3-Text(High), SCU will continue to export
debug logs to the mobile computer’s internal storage. Do not select any of
these options unless necessary.
Reg. Domain Indicates the regulatory domain or domains for which the radio is configured by
default. Default setting is “Worldwide”, which means that the radio can be used in
any domain.
Dump
Location…
Dumps the diagnostics results to a desired location in the form of a .txt file.
Import/Export Imports/exports SCU settings as a profile (.sdc format). When exporting, you may
select to include Global Settings, Third Party Config settings or Profile Settings.
When importing, you may select to add to existing settings, or replace the set
values in Global Settings, Third Party Config and Profiles.
Note: It is recommended that Driver Debug output settings are kept as default and not
changed.
Select Debug to check debug
settings
To Next Page
Loading...
Need help?
General
Weight and Dimensions
