190
9700 Mobile Computer (CE) Reference Manual
pressed
External Power Sets the screen backlight timeout on external power and whether
to trigger screen/keypad light up upon pressing a key.
Option Default Settings
Turn off LCD backlight if device is not used
for:
Checked;
10 min
Turn off keypad backlight if device is not
used for:
Checked;
10 sec
Turn on LCD backlight when a button is
pressed or the screen is tapped
Checked
Turn on keypad backlight when a button is
pressed
Checked
Profile Sets backlight profiles or restores them back to default.
BT MANAGER
Bluetooth settings tool that allows you to select whether to enable device re-connection
and auto-inquiry, as well as set preference for re-connection of each service. See
Use
Bluetooth
.
BUTTON ASSIGNMENT
Redefines key functions under keypad’s normal and function mode. See Button
Assignment for more details.
CERTIFICATES
Imports either your personal digital certificates, certificates from trusted authorities, or
intermediate certificates in order to access certain secured networks. Once imported,
you may view or remove the installed certificates.
COM PORT MAPPING
Changes the function each COM port serves. COM ports 1 to 9 are re-assignable.
Default settings are as follows:
COM port
Default Settings
COM1 Scan engine (Laser or 2D)
COM2 Bluetooth hardware port
COM3 EXTUART
COM4~9 N/A
Default button restores all COM port settings back to factory default.
Upon system reboot, the mobile computer checks whether there is a registry entry for
Bluetooth Serial Port Profile (SPP) or Dial-up Profile (DUN). These profiles (if existent) are
assigned to fixed ports and cannot be re-assigned.
Check if any COM ports are occupied by Bluetooth SPP before editing COM port settings.
After editing COM port settings, tap in the upper right corner. A prompt will appear
warning that the system needs to reboot in order to apply settings. Tap OK to reboot, or
Cancel to discard changes.
If two ports are assigned the same function, a pop up dialog appears when OK is tapped to
To Next Page
Loading...
Need help?
General
Weight and Dimensions
