8-2
Cisco 1240 Connected Grid Router Hardware Installation Guide
OL-26223-04
Chapter 8 Unmounting the Router
Unmounting Instructions
Step 6 Remove the ground wire located at the side of the router.
Step 7 Remove the security panel from the unit (if one is installed, this is an optional part of the mounting
bracket). For more information, see the “Install the Optional Security Panel” section on page 5-19.
Figure 8-1 Location Security Panel Installed
300620
2
1 3
Item Description
1 Router door
2Captive bolt
3 Security panel
To Next Page
Loading...
