Cisco 1240 - Cabling Instructions

13-6
Cisco 1240 Connected Grid Router Hardware Installation Guide
OL-26223-04
Chapter 13 Installing External Non-Cisco Modules
Install an External Non-Cisco Module
Figure 13-2 shows all six mounting bosses on the router, and the corresponding dimensions.
Figure 13-2 Dimensions for Mounting External Non-Cisco Modules
Cabling Instructions
This section describes the two cabling procedures. Use the procedure that applies to your installation
configuration:
• External Cabling, page 13-7
• Internal Cabling, page 13-8
300528
6.8 inches
(17.3 cm)
5.4 in
(13.7 cm)
9.2 in
(23.4 cm)