14-2
Cisco 1240 Connected Grid Router Hardware Installation Guide
OL-26223-04
Chapter 14 Router LED Locations and States
LED Locations and State Descriptions
LED Locations and State Descriptions
SYS LED—System Status
View the system status LED to determine the overall operating and power status of the router.
A second, identical system status LED is located inside the router. See the “Alarm and Network
Connection LEDs” section on page 14-3 for the location of the interior SYS LED.
Figure 14-1 System Status LED (SYS) — Router Bottom Exterior
Table 14-1 SYS LED Status
Label
Description Color and State Description
SYS
System status
Green Normal system operating status
Green blinking The system is starting up or power cycling, and loading system
software, including BIOS and operating system
Amber System receiving power but there is an error condition
Off System not receiving power
To Next Page
Loading...
