5-5
Cisco 1240 Connected Grid Router Hardware Installation Guide
OL-26223-04
Chapter 5 Mounting the Router
Contents of the Mounting Kits
Band Strap Kit
When to Use
Use the straps in the Band Strap Kit when you mount the router on a pole larger than 4.5 inches (11.4 cm)
in diameter. This installation also requires the pole mount kit and strap tool kit. For more information,
see the “Pole Mount Kit” section on page 5-2 and the “Strap Tool Kit” section on page 5-6.
Figure 5-3 Band Strap Kit Contents
Item Name Qty. Description
1 Mounting bracket 1 Mounts router to mounting plate, which is
installed on pole.
2 Mounting bracket security panel
(optional)
1 Optional bracket feature, which prevents the
unauthorized users from removing the router from
the mounting bracket.
Included Hardware
3 Washer (M8) 12 Use this hardware to attach the mounting bracket
to the mounting plate, and the router to the
mounting bracket. Assemble the washer, split lock
washer, and bolt as described in the “Assemble
Bracket Hardware” section on page 5-13.
4 Split lock washer (M8) 12
5 Bolt (M8 x 1.25) 12
6 Serrated nut (M8 x 1.25) 1
7 Security panel screws (8-32) 3 Use these screws to attach the security panel to the
mounting bracket.
Item Description
1 Steel straps (2)
To Next Page
Loading...
