CHAPTER
14-1
Cisco 1240 Connected Grid Router Hardware Installation Guide
OL-26223-04
14
Router LED Locations and States
View the Cisco 1240 Connected Grid Router (CGR 1240 or router) LEDs to determine the overall state
of the system and to verify the status of specific connections, ports, and system components.
In addition to viewing the LEDs on the router hardware, you can use the router command line interface
as described in the “Related Commands” section on page 14-8 to check the system status LED state from
remote locations.
This chapter includes the sections:
• LED Locations and State Descriptions, page 14-2
• Related Commands, page 14-8
To Next Page
Loading...
