CHAPTER
5-1
Cisco 1240 Connected Grid Router Hardware Installation Guide
OL-26223-04
5
Mounting the Router
This chapter describes the safety information, equipment, and procedures required to mount the
Cisco 1240 Connected Grid Router (CGR 1240 or router) on a vertical pole or streetlight. This chapter
contains these sections
• Mounting Kits Overview, page 5-1
• General Safety Information for Mounting, page 5-2
• Contents of the Mounting Kits, page 5-2
• Materials and Tools You Supply, page 5-7
• Mounting Instructions, page 5-7
• Grounding Instructions, page 5-26
• Bracket Dimensions, page 5-28
Mounting Kits Overview
You will need some or all of the kits described in this section to install the router on a pole. Your
installation environment and requirements determine the kits you need.
For a detailed description of each kit, see the “Contents of the Mounting Kits” section on page 5-2.
:
Cisco Product ID (PID) Name Description
– Mounting
Bracket Kit,
page 5-4
Use this kit if your installation requires a Cisco mounting
bracket to mount the router. This kit is included with in the
router accessory kit, and is used with the pole kit and
includes the hardware required to attach the mounting
bracket to the mounting plate.
CGR-PMK1000 Pole Mount Kit,
page 5-2
This kit is required for all pole or streetlight installations
and includes a mounting plate and the hardware required
to attach the mounting plate to a pole.
To Next Page
Loading...
