11-4
Cisco 1240 Connected Grid Router Hardware Installation Guide
OL-26223-04
Chapter 11 Using the SD Flash Memory Module
SD Card Status
SD Card Status
• SD Card LED, page 11-4
SD Card LED
The SD card LED is located directly next to the SD card slot, and is visible when the SD card slot seal
is removed. This section describes the LED states and descriptions.
Figure 11-3 SD Card LED Location
Figure 11-4 SD Flash Memory Module LED States
300568
SD card LED
Description Color and State Description
SD card status Green solid SD flash card is installed and operating normally.
Note If the SD Card is removed, the SD flash
memory module LED remains green solid until
the router is rebooted.
Green blinking A data transfer between the router and the SD card is in
progress.
Amber solid
• An error occurred when the router accessed the SD
flash card.
• The router could not find a system software image.
Amber blinking An unsupported SD card is installed in the slot.
To Next Page
Loading...
