EasyManua.ls Logo

Cisco 1240 - Cisco Connected Grid Modules; Antennas Overview; GPS Antenna

Cisco 1240
216 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10-2
Cisco 1240 Connected Grid Router Hardware Installation Guide
OL-26223-04
Chapter 10 Antennas
Antennas Overview
Cisco Connected Grid Modules
For instructions on how to install or replace modules in the router, see the Connected Grid module
documentation at: www.cisco.com/go/cg-modules
Antennas Overview
This section is an overview of the type of antennas used with the router.
Fixed Antennas
The router ships with two fixed antennas:
GPS Antenna, page 10-2
WiFi Antenna, page 10-3
Module Antennas
The router supports up to seven module antennas. See detailed information in the “Connected Grid
Module Antennas” section on page 10-4.
GPS Antenna
The router ships with one outdoor GPS antenna already installed and connected internally to the
on-board GPS module. The GPS is used to identify the router location after the router is installed and is
in use.
The GPS antenna is not a field-replaceable component.
For detailed technical information about the GPS antenna, see the “GPS Antenna Specifications”
section on page 10-9.
For information about the GPS status LED, located inside the router chassis, see the “Router LED
Locations and States” chapter.
For more information about the GPS module, see the “GPS Module” section on page 3-32.

Table of Contents

Related product manuals