3-12
Cisco 1240 Connected Grid Router Hardware Installation Guide
OL-26223-04
Chapter 3 Router Hardware Description
Hardware Features Detailed Description
Hardware Features Detailed Description
This section provides detailed information about all of the router hardware features, including
descriptions, illustrations, specifications, and links to related information. This section is divided into
two topics:
• Router Hardware Exterior Features, page 3-12
• Router Hardware Interior Features, page 3-17
Router Hardware Exterior Features
This section includes detailed information about the exterior hardware features and contains the
following topics:
• Chassis Enclosure, page 3-12
• Chassis Cable Ports, page 3-13
• Console Port, page 3-14
• SD Flash Memory Module, page 3-16
• 10/100BASE-T Fast Ethernet Connector, page 3-16
• Protective Vent, page 3-17
• AC Power Supply, page 3-17
Chassis Enclosure
The Cisco CGR 1240 Router industrial enclosure (see Figure 3-1) meets Type 4X and IP67 standards
and is designed for deployment in extreme weather. The enclosure can be painted to comply with
aesthetic requirements.
Caution Painting or otherwise modifying the router enclosure can affect the chassis operating temperature
limitations.
Specifications
Additional Information
For router regulatory compliance information, see the Regulatory Compliance and Safety Information
for the Cisco 1000 Series Routers on Cisco.com, at: www.cisco.com/go/cgr1000-docs
Specification Description
Dimensions 12 x 8 x 7.5 inches (30.5 x 20.3 x 19 cm)
Environmental Type 4x compliant
IP67 compliant
Operating temperature -40 to +158°F (-40 to +70°C)
To Next Page
Loading...
