Cisco 1240 - Chapter 1 Unpacking the Router; Router Package Contents

1-2
Cisco 1240 Connected Grid Router Hardware Installation Guide
OL-26223-04
Chapter 1 Unpacking the Router
Router Package Contents
Table 1-1 Cisco 1240 Connected Grid Router Package Contents
Qty. Item Description
1 Cisco CGR 1240 Router enclosure, with the following components installed:
• Connected Grid Modules (1 to 4, depending on configuration ordered)
• GPS Antenna (depending on configuration ordered)
• WiFi Antenna (depending on configuration ordered)
• Connected Grid Module Antennas (1 to 7, depending on configuration ordered)
• 1-GB SD Flash Memory Module
• AC Power Supply
• Battery Backup Units (0 to 3, depending on configuration ordered)
1 Console cable RJ-45-to-DB-9
1 Grounding kit Grounding lug and two screws.
For details, see the “Grounding Hardware” section on page 5-26 in the “Mounting the
Router” chapter.
1 Cable glands kit Includes:
• One cable gland
• One tube of anti-seize compound
1 Mounting bracket kit Includes:
• Mounting bracket
• Mounting bracket security panel
• Required hardware
For details, see the “Mounting Bracket Kit” section on page 5-4, in the “Mounting the
Router” chapter.
Optional Items (Ordered Separately)
1 Pole mount kit Includes:
• Mounting plate
• Two clamp brackets
• Required hardware
For details, see the “Pole Mount Kit” section on page 5-2, in the “Mounting the Router”
chapter.
1 Band strap kit Two steel straps. For details, see the “Band Strap Kit” section on page 5-5, in the “Mounting
the Router” chapter.
1 Strap tool kit BAND-IT strap tool. For details, see the “Strap Tool Kit” section on page 5-6, in the
“Mounting the Router” chapter.
1 Antenna plug CGR-ANT-PLUG