Cisco 1240 - Page 5

Contents
v
Cisco 1240 Connected Grid Router Hardware Installation Guide
OL-26223-04
Mounting Bracket Kit 5-4
Band Strap Kit 5-5
Strap Tool Kit 5-6
Materials and Tools You Supply 5-7
Mounting Instructions 5-7
Router Orientation 5-7
Install the Mounting Plate onto a Pole 5-8
Install the Mounting Plate—Poles Up to 4.5 Inches in Diameter 5-8
Install the Mounting Plate—Poles Larger than 4.5 Inches in Diameter 5-10
Install the Mounting Plate—Through-Pole Mounting (Optional) 5-11
Attach the Mounting Bracket to the Mounting Plate 5-13
Assemble Bracket Hardware 5-13
Install the Router onto the Mounting Bracket 5-16
Mounting Instructions 5-16
Install the Optional Security Panel 5-19
Mounting the Router onto a Wall 5-22
Router Orientation When Mounting 5-22
SD Card Slot Access for Bracket-Mounted Routers 5-25
Grounding Instructions 5-26
Grounding Hardware 5-26
Materials You Supply 5-27
Ground the Router 5-27
Bracket Dimensions 5-28
CHAPTER 6 Installing the Router 6-1
Before Installing 6-1
Prepare the Installation Site 6-1
Read the Safety Information 6-1
Preventing Electrostatic Discharge Damage 6-1
Cabling Guidelines 6-2
Related Information 6-2
Basic Hardware Installation 6-2
Connect to the Ethernet Backhaul Network 6-3
Connecting to AC Power 6-4
AC Power Cable 6-5
Connect to AC Power 6-5
Power and Reset Buttons 6-7
Accessing the Buttons 6-8
Related Information 6-8