Third Party Headsets 23
Audio Quality 24
Wired Headsets 24
Bluetooth Wireless Headsets 24
Wireless Headsets 26
Cisco Headset Configuration on Cisco Unified Communications Manager 26
Set Up a Headset for a Single Phone 27
Headset Parameters on Cisco Unified Communications Manager 28
Set Up Wideband Codec 29
Headset Management on Older Versions of Cisco Unified Communications Manager 30
Download the Default Headset Configuration File 30
Modify the Default Headset Configuration File 31
Install the Default Configuration File on Cisco Unified Communications Manager 33
Restart the Cisco TFTP Server 34
Connect a Headset to Your Phone 34
Connect a Standard Headset 34
Connect a USB Headset 35
Connect a Cisco Standard Base with the Y-Cable 35
Connect the Multibase to a Bluetooth Device 36
Disconnect the Multibase from a Bluetooth Device 36
Erase All Bluetooth Pairings 36
Postpone a Phone Upgrade 37
Cisco Headset Customization 37
Cisco Headset 500 Series Customization 37
Adjust Your Bass and Treble 37
Adjust Your Speaker Sidetone 38
Adjust Your Microphone Volume 38
Cisco Headset 700 Series Customization 38
Set the Cisco Headset 730 Noise Cancellation Level 38
Set the Cisco Headset 730 Sidetone Level 39
Set the Cisco Headset 730 General Settings 39
Reset the Cisco Headset 730 Settings 40
View the Cisco Headset 730 Details 40
Change Your Headset Ringer Settings 40
Cisco IP Phone 7800 and 8800 Series Accessories Guide for Cisco Unified Communications Manager
iv
Contents
To Next Page
Loading...
Need help?
General
