Cisco 7800 Series

Step 4 Center the anchor over the pencil mark and use a #2 Phillips-head screwdriver to press the anchor into the
wall. Screw the anchor clockwise into the wall until it is seated flush.
Step 5 Use the included screws and the #2 Phillips-head screwdriver to attach the bracket to the wall through the
anchors.
Examples of a Wall Bracket Attached to a Wall
The following diagram illustrates attaching a Cisco IP Phone 7800 and 8800 series wall bracket to
a wall.
Cisco IP Phone 7800 and 8800 Series Accessories Guide for Cisco Unified Communications Manager
72
Wall Mount Kits
Attach the Wall Bracket to the Wall