7-7
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 7 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Direct transfer Allows a user to connect two calls to each other (without
remaining on the line).
For more information, refer to Cisco
Unified Communications Manager System
Guide, “Cisco Unified IP Phones” chapter.
Directed Call Park Allows a user to transfer an active call to an available
directed call park number that the user dials or speed dials.
After pressing Transfer, the user dials the directed call park
number to store the call.
Call Park BLF speed dial enables access to the directed call
park number and indicates that the directed call park
number is available or unavailable.
Note If you implement Directed Call Park, avoid
configuring the Park softkey. This prevents users
from confusing the two Call Park features.
For more information refer to:
• Cisco Unified Communications
Manager Features and Services
Guide, “Call Park and Directed Call
Park” chapter.
Do Not Disturb
(DND)–Reject
Enables a user to temporarily busy out the phone when it is
activated. If no call forwarding features are activated, calls
to this station are routed to a busy signal or voice mail
when DND–Reject is active. Otherwise, all incoming calls
are routed to a preassigned call forwarding busy target.
Cisco Unified CallManager Features and
Services Guide, “Do Not Disturb” chapter.
Table 7-1 Telephony Features for the Cisco Unified Wireless IP Phone 7925G (continued)
Feature Description Configuration Reference
To Next Page
Loading...
